口碑最好的彩票平台.十大正规彩票安全平台

设备列表
产品信息 »  产品目录  » 方向控制元件  » 先导式4、5通电磁阀
先导式4、5通电滋阀

4通电磁阀／盒型集装式 SJ1000/2000/3000/4000

    ・追加了大流量型SJ3000A
    ・追加了大流量型SJ3000A
    ・可混装SJ系列尺寸5的阀
    ・采用插头插座式连接（直接插入式）
    　位数增减、更换阀容易
    ・也可对应非插入式单独配线
系列流量特性
4/2→3/5（A/B→E）
C［dm3/（s・bar）］		流量特性
4/2→3/5（A/B→E）
b		流量特性
4/2→3/5（A/B→E）
Cv		气缸驱动
尺寸		消耗功率（W）
SJ10000.320.330.08ø320.55（标准）
0.23（带节电回路）
SJ10000.320.330.08ø320.55（标准）
0.23（带节电回路）
SJ30000.560.110.12ø500.4（标准）
0.15（带节电回路）
SJ3000A
大流量型		0.760.190.21ø630.4（标准）
0.15（带节电回路）
SJ40002.610.200.68ø800.4（标准）
0.15（带节电回路）

产品特点

■Takes uo minimal space with a body width of 7.5mm (SJ2000)or 10mm (SJ3000).
■Power consumption

0.15 W (SJ3000 with power saving circuit)
0.23 W (SJ2000 with power saving circuit)

■Service life of 50 million cycles or more
(Based on SMC life test conditions)
■Manifold Variations
Plug-in connector type (Card edge type)

Series SJ2000 and SJ3000 can be mounted together.
・Can easily increase or decrease stations and replace valves.
🍨 ・34 pins connector allows up to 16 stations with double solenoi👍ds, 32 stations with single solenoids.

Non plug-in individual wiring compliant, too 口碑最好的彩票平台.十大正规彩票安全平台:
■Option Variations

SUꦦP/EཧXH block assembly with regulator and pressure switch

This pressure regulator is intended to adjust the SUP pressure of the manifold.
🍌Additionally, pressure switch and pressure gauge can be mounted.


Regulator block

This is a regulator block with the same width (10 mm) as the SJ3000.
Pressure supplied from the D side is used to reduce pressure in the manifold.
The U side v🌃alves are all depressurized from the r꧂egulator block.


Valve with speed controller

As a speed controller is built-into this valve, the cylinder speed can be adjusted on the valve side.
Two types, meter-in and meter-out, are set.

口碑最好的彩票平台.十大正规彩票安全平台:


Intermediate connector block assembly

This connector block can be used by inserting it into the middle of the manifold.
This can be used, for example, when you wish to separate electrical control of valves in the same manifold, or when the number of control points is insufficient.
The assembly is also compatible with PC wiring with the power supply terminal.
(Please contact SMC.)

■Vacuum Release Valve with Restrictor Series SJ3A6

Two spool valves are built-in.
Vacuum suction and release can be controlled ꦬwith a single valve.

  • Power consumption 0.15 W (with power saving circuit)
  • Width: 10 mm (same size as Series SJ3000)
  • Equipped with restrictor to enable flow rate adjustment of release air.
  • Replaceable filters are built-in on the vacuum and release sides.
  • Equipped with a pressure detection port enabling connection of a pressure switch, etc.
  • Can be combined with 4 port solenoid valve, Series SJ2000/3000 (Made to Order).
    (Consult SMC for details.)
  • Enables 2-system pressure switching where the 1(P) port and 3/5(E) are set to different positive pressures.
    (In this case, flow can be adjusted on the P-port side only.)

Go Top